Advertisement
Quick Links
2 Door Robe
Assembly Instructions
001 xx 9415
- Please keep for future reference
Dimensions
Width - 68.5cm
Depth - 49.8cm
Height - 180.0cm
MADE IN
GREAT BRITAIN
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123
Please turn to back page for important information when contacting Customer Helpline.
Rev A- 10/04/2019
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for JD Williams Taylor 2 Door Robe
Summary of Contents for JD Williams Taylor 2 Door Robe
- Page 1 2 Door Robe Assembly Instructions 001 xx 9415 - Please keep for future reference Dimensions Width - 68.5cm Depth - 49.8cm Height - 180.0cm MADE IN GREAT BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123 Please turn to back page for important information when contacting Customer Helpline.
- Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly Do not stand or put weight on Check you have all the We do not the product, this could cause components and tools listed on recommend the damage.
- Page 3 Components - Panels Please check you have all the panels listed below Important - Thick lines indicate finished edges 0843 (68.5x49.8cm) 1229 Bottom x 2 (65.1x46.2cm) 1228 1231 1232 Door x 2 Left End Panel Right End Panel (170.0x32.1cm) (178.4x49.6cm) (178.4x49.6cm) 0677 Back Rail...
- Page 4 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 01709 534123 Please turn to back page for important information when contacting Customer Helpline. Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly, In some case more fittings may be supplied than are required.
-
Page 5: Exploded View
Exploded View 7194 0843 1231 8024 1229 1232 0677 1228 1228 1229 0435... - Page 6 Assembly Instructions Step 1 Fitting dowels to top panel. Insert 4 metal dowels into the top panel 0843 Note: Tighten metal 0843 dowels up fully against the panel. Do not over-tighten. Step 2 Connect the top rail to the top panel. Using 2 screws secure 7194...
- Page 7 Assembly Instructions Step 4 Fitting hanging rail support & hingeplates to left end. Insert 3 hinge plates into the left end panel 1231 Insert 2 screws through the holes in the hanging rail support Note: A bradawl may be required when attaching 1231 the hanging rail support to create the lower hole.
- Page 8 Assembly Instructions Step 6 Fitting hanging rail support & hingeplates to right end. Insert 3 hinge plates into the right end panel 1232 1232 Insert 2 screws through the holes in the hanging rail supports Note: A bradawl may be required when attaching the hanging rail support to create the lower hole.
- Page 9 Assembly Instructions Step 9 Correct Attach hinges to the 2 doors Insert hinges Incorrect into holes, ensure the hinge is straight (90 degree angle). 1228 Bradawl Before securing the hinges , we recommend you pre - mark the doors using a bradawl. 1228 Secure hinges doors using screws...
- Page 10 Assembly Instructions Step 10 Connect left end to the plinths, bottoms and back rail. 1229 We recommend that 2 people for this step, to hold the back rail in place. Connect the dowels in 1231 the left end to the 0435 0435 cams in the plinths...
- Page 11 Assembly Instructions Step 12 Connect right end and left end to the top panel. Connect the dowels in 0843 the top panel to the 0843 1232 cams in right end 1232 and the left end 1231 1231 Lay the unit on its front.
- Page 12 Assembly Instructions Step 11 Step 14 Secure back panel in the unit. Use the panel pin guide when locating the panel pins. This will hold the panel pins vertical and ensure the correct distance from the edge. 8024 Step 15 Add stability blocks.
- Page 13 Assembly Instructions Step 16 WARNING Fixing to wall IN ORDER TO PREVENT OVERTURNING We recommend that this THIS PRODUCT MUST BE USED WITH THE WALL ATTACHMENT DEVICE unit is fixed to a suitable PROVIDED wall to prevent possible Serious or fatal crushing injuries can occur from overbalancing.
- Page 14 Assembly Instructions Step 17 Hanging doors With help, slot door hinges onto hinge plates. Ensure screw on hinge slides into the slot on hingeplate. See Diagrams 1, 2 and 3. Tighten screw shown to lock hinges in position. See ‘Hinge adjustment’ page if the doors need adjusting.
- Page 15 Assembly Instructions Step 18 Hinge adjustment To move doors up or down: loosen screws shown and move doors to suit. Re-tighten screws. To move doors in or out: loosen screw shown and move doors to suit. Re-tighten screws. To move doors left or right: loosen or tighten screw as shown.
- Page 16 Assembly Instructions Congratulations! Your unit is complete. Important Information If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123 8am - 4.30pm (Monday to Thursday) 8am - 2.30pm (Fridays) (by contacting the customer service line your statutory rights are not affected) Please have the following information to hand: >>...
Need help?
Do you have a question about the Taylor 2 Door Robe and is the answer not in the manual?
Questions and answers