Advertisement
Quick Links
2 Door 1 Shelf Mirrored Robe
Assembly Instructions
001 xx 4059
- Please keep for future reference
Dimensions
Width - 66.8cm
Depth - 49.8cm
Height - 179.9cm
MADE IN
GREAT BRITAIN
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123
Please turn to back page for important information when contacting Customer Helpline.
Rev B - 15/02/2017
Advertisement
Related Manuals for JD Williams 2 Door 1 Shelf Mirrored Robe
Summary of Contents for JD Williams 2 Door 1 Shelf Mirrored Robe
- Page 1 2 Door 1 Shelf Mirrored Robe Assembly Instructions 001 xx 4059 - Please keep for future reference Dimensions Width - 66.8cm Depth - 49.8cm Height - 179.9cm MADE IN GREAT BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123 Please turn to back page for important information when contacting Customer Helpline.
- Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly Do not stand or put weight on Check you have all the We do not the product, this could cause components and tools listed on recommend the damage.
- Page 3 Components - Panels Please check you have all the panels listed below Important - Thick lines indicate finished edges 9365 (66.8x49.8cm) 9366 Shelf x 2 (63.4x45.8cm) 9369 9367 9368 Door x 2 Left End Panel Right End Panel (168.4x32.9cm) (178.4x48cm) (178.4x48cm) 9359 8565...
- Page 4 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 01709 534123 Please turn to back page for important information when contacting Customer Helpline. Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly, In some case more fittings may be supplied than are required.
-
Page 5: Exploded View
Exploded View 9365 7194 9367 9366 9369 8565 9369 9370 9368 9366 9359... - Page 6 Assembly Instructions Step 1 Fitting dowels to top panel. Insert 4 metal dowels into the top panel 9365 Note: Tighten metal 9365 dowels up fully against the panel. Do not over-tighten. Step 2 Connect the top rail to the top panel. Using 2 screws secure 7194...
- Page 7 Assembly Instructions Step 4 Fitting hanging rail support & hingeplates to left end. Insert 3 hinge plates into the left end panel 9367 Insert 2 screws through the holes in the hanging rail support Note: A bradawl may be 9367 required when attaching the hanging rail support to create the lower hole.
- Page 8 Assembly Instructions Step 6 Fitting cams & dowels to the left end panel. Insert 8 metal dowels and 2 cams into 9367 left end panel 9367 Step 7 Fitting cams & dowels to the right end panel. Insert 8 metal dowels and 2 cams into 9368...
- Page 9 Assembly Instructions Correct Step 9 Attach hinges to the 2 doors Incorrect Insert hinges into holes, ensure the hinge is straight (90 degree angle). 9369 Before securing the Bradawl hinges , we recommend you pre - mark the doors using a bradawl. 9369 Secure hinges doors using screws...
- Page 10 Assembly Instructions Step 10 Connect left end to the plinth, shelves and back rail. Connect the dowels in 9367 the left end to the 9359 cams in the plinth the shelves 9366 9366 8565 the back rail 9367 We recommend that 2 people for this step, to 8565 hold the back rail in...
- Page 11 Assembly Instructions Step 12 Connect right end and left end to the top panel. Connect the dowels in 9365 9365 the top panel to the 9368 cams in right end 9367 and the left end 9367 9368 Step 13 Squaring up the unit. Important: Ensure a tape measure is used...
- Page 12 Assembly Instructions Step 11 Step 14 Slide back panel into the unit. Slide the back panel into the grooves in the left & right end panels and the top panel. 9370 Use the panel pin guide when locating the panel pins.
- Page 13 Assembly Instructions Step 16 Fixing to wall We recommend that this unit is fixed to a suitable wall to prevent possible overbalancing. We have included a fixing bracket for this. No fixing screws are provided as they will need to suit the wall type, and the length of screw will depend on the distance from the...
- Page 14 Assembly Instructions Step 17 Hanging doors With help, slot door hinges onto hinge plates. Ensure screw on hinge slides into the slot on hingeplate. See Diagrams 1, 2 and 3. Tighten screw shown to lock hinges in position. See ‘Hinge adjustment’ page if the doors need adjusting.
- Page 15 Assembly Instructions Step 18 Hinge adjustment To move doors up or down: loosen screws shown and move doors to suit. Re-tighten screws. To move doors in or out: loosen screw shown and move doors to suit. Re-tighten screws. To move doors left or right: loosen or tighten screw as shown.
- Page 16 Assembly Instructions Congratulations! Your unit is complete. Important Information If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123 8am - 4.30pm (Monday to Thursday) 8am - 2.30pm (Fridays) (by contacting the customer service line your statutory rights are not affected) Please have the following information to hand: >>...