Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the • During assembly do not stand • We do not components and tools listed on or put weight on the product, recommend the use page 2 this could cause damage.
Page 3
Components - Panels Please check you have all the panels listed below Left Side Panel x 1 Central Panel x 1 Right Side Panel x 1 Door Panel x 1 (47.6(w) x 13(d) cm) (47.6(w) x 13(d) cm) (47.6(w) x 13(d) cm) (47.2(h) x 27.7(d) cm) Large Back Panel x 1 Large Shelf x 1...
Page 4
Components - Fittings Note: may be supplied than are required. 10mm Screw x 6 Hinge x 2 Catch Plate x 1 35mm Screw x 12 Wall Bracket x 2 Magnetic Push Catch x 1 12mm Screw x 6 Tools required Phillips screwdriver (medium &...
Page 5
Assembly Instructions Step 1 1. To Central Panel 2 connect 1 x Magnetic Push Catch as shown using 2 x Screws A Step 2 1. To Door panel 4 connect 1 x Catch Plate c as shown using 2 x Screw a 2.
Page 6
Assembly Instructions Step 4 1. Slide 1 x Large Shelf Panel and 2 x Small Shelves 6 into position Step 5 1. Slide Large Back panel 7 and Small Back panel into position as shown Step 6 1. Connect Top Panel 10 to Left side Panel 1 , Central Panel 2 Right Side Panel 3...
Page 7
Assembly Instructions Step 7 1. Connect Brackets F to the reverse of the unit as shown using 2 x Screws G per bracket 2. To mount the unit to the wall 2 x holes will need to be drilled Note: Please refer to the wall mounting guide at the back of this instruction for further...