Ec/Eu Declaration Of Conformity; Assembly; Prerequisites For Assembly; Checking The Condition At Delivery - Meiko M-iClean U Series Operating Instructions Manual

Dishwasher with plinth 120 mm or 150 mm
M-iClean U / M-iClean U Type M2 (dimensions in mm)
US 120 US 150
A 830–855 860–885
460
B
C 600
D 275 305
E 50
F 835–855 865–885
G 470–480
H 605
5.2
6

Assembly

6.1
6.1.1
9763258
UM 120 UM 150
830–855 860–885
600
600
275 305
50
835–855 865–885
610–620
605

EC/EU declaration of conformity

See separate EC-/EU-Declaration of Conformity.
Warning
Danger of injury due to entry into a danger zone
Unauthorised persons might be in or enter the danger zone during transport, as-
sembly, commissioning, maintenance and repair work. This can lead to injuries.
•
Only qualified persons should perform work at and with the machine.
•
Remove unauthorised persons from the danger zone.
•
Block off danger area and mark it for third parties.
•
Never remove or disable safety devices on the machine.

Prerequisites for assembly

Checking the condition at delivery

•
Check that the delivery is complete immediately after receiving it by comparing
it with MEIKO's order confirmation and/or the delivery note.
The dishwasher can also be set up without feet, in
which case alignment is no longer possible.
Height of the machine without feet in mm:
US 120/ US 150/
UM 120 UM 150
+5 +5
820 850
UM+ 120 UM+ 150
950–975 980–1005
600
600
275 305
50
955–975 985–1005
610–620
605
22 / 64
UM+ 120/ UM+ 150/
UL 120 UL 150
+5 +5
940 970
UL 120 UL 150
950–975 980–1005
600
680
275 305
130
955–975 985–1005
610–620
685