Forced Drainage; Technical Data; Ec/Eu Declaration Of Conformity; Assembly - Meiko M-iClean H Series Operating Instructions Manual

4.8.2
5

Technical data

5.1
6

Assembly

6.1
6.1.1

Forced drainage

If the wash tank and boiler have been full for 24 hours, they will be force drained.
The water in the wash tank and boiler is pumped out.
Forced drainage takes place depending on operational status:
•
MACHINE OFF: when machine is switched on
•
ECO MODE: either after 24 hours or upon start of Eco mode III or IV, .
•
As soon as the door or hood is closed for the first time after 24 hours have
passed.
MEIKO has created a dimensional drawing that shows machine dimensions as well
as connection and consumption values.
Further data should be taken from the MEIKO dimensional drawing.
Machine weight
Versions Machine
M-iClean HM
M-iClean HL
M-iClean HXL
Noise emissions
Work place noise level LpA ≤ 70 dB (A).

EC/EU declaration of conformity

See separate EC-/EU-Declaration of Conformity.
Warning
Danger of injury due to entry into a danger zone
Unauthorised persons might be in or enter the danger zone during transport, as-
sembly, commissioning, maintenance and repair work. This can lead to injuries.
•
Only qualified persons should perform work at and with the machine.
•
Remove unauthorised persons from the danger zone.
•
Block off danger area and mark it for third parties.
•
Never remove or disable safety devices on the machine.

Prerequisites for assembly

Checking the condition at delivery

•
Check that the delivery is complete immediately after receiving it by comparing
it with MEIKO's order confirmation and/or the delivery note.
•
If applicable, submit a claim for any missing parts immediately to the freight for-
warder and notify MEIKO.
•
Check the machine for transportation damage.
145 kg
162 kg
230 kg
21 / 62 9750359