Quantum Scalar i40 Replacement Manual page 5

Figure 2 Bezel Screws and
Thumbscrew Location
Removing the Bezel
Screws
Screws
8 Remove the bezel as follows:
• Scalar i40: Grasp the bezel gently at the top and bottom and pull the
bezel straight out and off of the library. Do not tip or twist the bezel as
you pull it off.
• Scalar i80: Use your fingers to grasp the bezel near the center on both
sides, and pull outward to disengage the bezel (see
for location). There are plastic tabs on the inside of the bezel that help
secure the bezel to the library; pulling outward from this location helps
disengage them. You may need to move the bezel slightly back and
forth to remove it.
Quantum Scalar i40 and Scalar i80: Bezel Replacement
6-66553-03 Rev B
February 2014
Thumbscrew
securing library
to rack
Figure 3 on page 6
5