Clock Adjustment; How To Access The Programming Mode - Faema E92 Elite Manual

22. Clock adjustment

Use the "+" (34) and "-" (35) keys to adjust the clock.
The time increases (or decreases) one minute each time the
key is pressed.
The time changing speed increases if one of the keys (34 or
35) is kept depressed.

23. How to access the programming mode

N.B. ONLY if the item "Customer Progr." is set on "YES".
To access programming press the PROG (32) key; the following
message will appear on the display:
CUSTOMER PROG.
KEY MENU
Press one of the dispensing keys on the selection panel; the
relative led will remain on.
Use the "+" (34) and "-" (35) keys to position the cursor on the
desired line, then press the PROG (32) key.
fryday
Boiler P.
Always use the "+" (34) and "-" (35) keys to change the setting;
Note: when modifying data, the cursor changes to "
If the "Customer Progr." is set to "NO", the following message
+
will appear on the display:
59
09:20
1.1bar
CUSTOMER PROG.
NOT ENABLED!
key.
".