General Indications - Faema E92 Elite Manual

12.1 Drinks distribution - hot water
After having positioned the appropriate container under the hot
water nozzle (32), distribution is made in two ways.
DOSED FUNCTION
Press one of the hot water distribution keys (13a or 13c). The
corresponding led will light up, hot water will be issued and
will stop automatically upon completion.
The distribution may be interrupted at any time by pressing
the previously active key again (shown by the lighted led), or
the Stop button, continuous hot water (13b).
CONTINUOUS FUNCTION
Press the hot water distribution key (13b).
Hot water will be issued continuously until the hot water key
(13b) is pressed again to stop this function.
In continuous function the progrmmed dosed in the key is
not changed.
12.2 Drinks distribution - milk

GENERAL INDICATIONS

Milk is a delicate biological product and can easily deteriorate.
temperature no higher than 5°C (41°F) from the moment the
container is opened and throughout its entire period of use.
Our storage appliances are suitable for this purpose.
NOTE: at the end of the work day (or not more than 24 hours
from the time the container is opened), any remaining milk
must be discarded.
MILK DISTRIBUTION
Insert the tube (18d) into the milk.
After having positioned the appropriate container under the
cappuccino maker (18), press the milk distribution key (16).
The led above the selected key lights up.
The quantity of milk memorized during the programming phase
be stopped at any time by pressing the milk distribution key
(16) again.
describes how to adjust the temperature of the milk and
the density of the milk froth.
"When the machine is not used for a long period of
time, comply with the hygiene procedures regarding
preservation of milk".
18
18d
50
13a
13b
13c
10
16