Bottom Panel Plate Return Unit To Desk Installation - Steelcase Machine and Typewriter unit 41-ATT Assembly Directions

9.

BOTTOM PANEL PLATE RETURN UNIT TO DESK INSTALLATION

Remove bottom drawer from your desk. Then secure bottom panel plate to desk with (2) #10 x 1/2" sheetmetal
screws and (1) twin speednut. Assemble drawer back into desk.
10.
Secure bottom flange of back panel to bottom panel plate with (2) #10-24 x 3/8" machine screws and hex nuts.
Assembly Directions
93-9500974 REV A
Page
6 of 6