Desk To Return Unit Installation - Steelcase Machine and Typewriter unit 41-ATT Assembly Directions

8.

DESK TO RETURN UNIT INSTALLATION

Place end of return unit on hanger bracket
and secure with (2) clip angles and (2) 1/4-
20 x 1-1/4" round head sheetmetal screws.
(For wood top, omit clip angle) Drill (2) 3/
16" thru mounting bracket and into top and
secure with (2) 1/4 x 1" hex head screws.
(For wood top, drill (4) 3/16" holes and use
(4) 1/4 x 1" hex head screws)
Assembly Directions
93-9500974 REV A
Page
5 of 6