Special Safety References - Ubert Top Line User Manual

6

2.5 Special safety references

2.5.1 Safety devices
Before operating the unit all protective devices as well as all removable parts must
be installed correctly and be fully workable.
Protective devices may only be removed:
after stand still and
Prevention of unintentional restart.
If partial components are delivered, an authorized staff member or service technician
has to execute assembly according to installation guidelines.
2.5.2 Informal safety steps
The operating manual is to be kept constantly accessible in the operating area.
In addition to the operating manual all generally acknowledged and all local
regulations for accident avoiding and environmental protection have to be applied
with.
All safety- danger labels at the unit are to be kept in readable condition.
2.5.3 Education of the staff
Only trained and instructed staff is allowed to operate the unit.
The responsibilities of the staff are to be determined clearly for installing, start-up,
operation, assembling, and servicing of the unit.
During instructing the staff may only work at the unit under supervision of an
experienced person.
2.5.4 Unit-control
Only instructed staff is allowed to operate the controls.
2.5.5 Safety during regular operation
The unit is only to operate if all protective devices are fully workable.
At least once per shift the unit is to be examined with regard to visible damages and
functional ability of the safety devices.
2.5.6 Dangers caused by electrical energy
Any work on the electrical supply is to be executed only by a specialist.
Likewise the electrical connection of this unit to the power supply must be executed
by an examined electrician; the connection must follow the rules of the local
determinations.
The electric installation is to be examined regularly. Loose connections and brased
cabels are to be eliminated immediately.
If works at any life-parts are necessary, a second person who switches off the main
switch if neccessary is to consult.
2.5.7 Special danger-spots
• All removable parts like spit, disc or fan cover for instance, are only to be removed if
the rotisserie is switched off and all surfaces, inner walls and parts are cold!
• Caution while removing grilled food! All parts may be hot and may cause severe
burnings to your skin.
• Do not reach into the rotisserie while the appliance is hot and operating. Keep the
doors closed at any time!
Printed: 01/2018 Subject to change!
Important References
TopLineUserManual.docx