Rotisserie Assembly For Operation - Ubert Top Line User Manual

Operation
Drip Pan is used to catch drippings from the products being grilled. The drip pan slides out of the
unit.
Shaft and Disk
Assembly
Drip Pan Spit

5.4 Rotisserie assembly for operation

Slide drip pan into bottom of unit.
Note! Drip pan can be put in from either side.
Mount the edge of drip plates on pins in sides of unit and outside on the front- respectively the
rear panel.
5.4.1 Shaft and Disk assembly
Install Shaft into drive hub. See picture below.
Round Pin
Install disk onto shaft.
Printed: 01/2018 Subject to change!
Digital Electronic
Automatic/Manual Switch
Function Switch
Temperature Control
Slotted
TopLineUserManual.docx
23