Ubert Top Line User Manual page 17

Operation
5.2.2 Explanation of the digital electronic
Multi-Function-Display (upper 7-segment)
Shows program number.
Shows the current program resp. is blank if the PA program is selected.
If no program is running (Standby):
Shows "Pr X" or is blank in PA program
- X = program number 1...20
If a program is running (active):
Shows "Pr X.Y" or blank for the PA (=permanently adjustable) program
- X = programnumber 1...20
- Y = step number 1...3
Shows "End" at the end of a program
Temperature-Display (middle 7-segment)
Shows temperature at operation level.
Shows parameter name at programming level.
If no program is running and a program is selected:
Shows the set temperature of step 1 of the selected program
If PA program is selected:
Shows the set temperature of the PA program.
Push to toggle between set temperature and core temperature probe
If a program is selected and running :
Shows the actual temperature
Push to toggle between current temperature and core temperature probe
Keep pushed to show the set temperature of the current step of the program.
If PA program is selected and running :
Shows the actual temperature
Push to toggle between current temperature and core temperature probe
Push to change set temperature.(
set temperature can be changed; push
Printed: 01/2018 Subject to change!
Multi-Function-Display (upper 7-segment):
Temperature-Display (middle 7-segment)
Time-Display (lower 7-segment)
Temperature Button
Up Button
Down Button
Core Temperature Button
Programming Button
Start/Stop Button
Time Button
11
Start delay LED
12
Time LED
13
Core Temperature LED
14
Temperature LED
15
Spit rotation Button
14
starts to flash); by pushing up/down button
again to enter the change.
/
the
TopLineUserManual.docx
17