Load The Customer Data - NEC Xen Topaz System Hardware Manual

September 2004 NEC Business Solutions Ltd
2.4

Load the Customer Data

The backed up customer data can be loaded to the system by CF
Card. If the it is necessary, EXIFU-A1 PCB must be installed to the
system.
For the details of EXIFU-A1 installation, refer to the Section 5. (Page 5-4)
1. Insert the Customer Data CF card to the CF Slot on EXIFU-A1
2. Enter Program Mode (PRG90-04).
3. Dial and press HOLD.
4. When the data backup to the CF Card is complete, the display will
change to the next PRG.
5. Remove the CF Card and exit Programming Mode.
74 -
System Start Up