Power Supply; Loading Plc Programs; Teaching In The Locations Of The High-Bay Racking System - Festo MPS 8049013 Getting Started

Storage station

11.5 Power supply

•
The stations are supplied with electrical power from a power supply unit with an output voltage
of 24 V DC (max. 5 A).
•
The entire station is supplied with electrical power from the rack PLC.

11.6 Loading PLC programs

Proceed as described in the user's manuals for the utilized programming software in order to load the PLC
programs.
Current PLC programs for various controllers can be found on the Internet at the following website:
www.festo-didactic.com > Services > MPS® The Modular Production System > Stations

11.7 Teaching in the locations of the high-bay racking system

During teach-in, the coordinates of the racking system locations are taught in to the station controller (PLC)
(already set up upon shipment from the factory).
Teach-in is only required:
•
After a collision involving the planar surface gantry
•
After a mechanical component has been moved or replaced
Setting up network access and the teach-in procedure are described below step by step.
56
© Festo Didactic 8049748