Festo Checkbox Compact CHB-C Series Manual page 51

2. Fitting and commissioning
Festo P.BE−CB−COMP−en en 0503c
The Checkbox cannot be started again until the fault has been
eliminated:
1. eliminate cause of fault
2. quit fault message: Press START/STOP button
3. start the Checkbox: Press the START/STOP button
Further information:
Details on the fault codes and instructions on eliminating
faults can be found in appendix A.1.
The CHB−C−P/..X signalizes faults also at the PLC connec
tion via O/17 (fault) and O/23 (warning) (see chap. 4.3.7).
2−21