Technical Specifications - Festo Checkbox Compact CHB-C Series Manual

A. Technical appendix
A.5

Technical specifications

General specifications
Temperature range
Operation
Storage/transport
Relative humidity
Protection against electric shock
(protection against direct and indirect contact as
per DIN EN IEC 60 204−1)
Electromagnetic compatibility EMC
Interference emission
Interference immunity
Vibration and shock
Vibration
(tested as per DIN EN IEC 60 068−2−27)
Shock (tested as per DIN EN IEC 60 068−2−6)
Protection class as per EN 60 529 (plug con
nector inserted or fitted with protective cap)
Electric components
Power supply
Power consumption
Current consumption
Interfaces
2)
Digital I/Os
Encoder connection
Diagnostic interface
1)
The component is intended for industrial use. The maximum permitted I/O signal cable length is
30 m.
2)
See also table Electrical properties..."
Tab. A/14: Technical specifications: General specifications
A−22
−5 ... +45 °C
−20 ... +70 °C
95 %, non−condensing
by means of PELV circuits
(Protective Extra−Low Voltage)
1)
See conformity declaration (www.festo.com)
1 g acceleration at 9...27 Hz
5 g acceleration at 60...150 Hz
30 g at 11 ms duration
IP64
24 V ± 15% to be protected with 5 A fuse
(medium time−lag)
With outputs not loaded typ. 18 W
With outputs not loaded typ. 750 W
As per EN 61 131−2
As per RS 485
As per RS 232 (115 kBaud)
Festo P.BE−CB−COMP−en en 0503c