BDI MARGO 5201 Manual

MARGO
Shelf

Product Registration

Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today, and you will be entered to win free a
BINK table from BDI: www.bdiusa.com/register

Placement and Maintenance

Your Margo Shelf is designed for indoor use on level floors.
Clean wood veneer and steel parts with a moist cloth.
Margo is engineered for easy assembly. Carefully follow this procedure to
prevent any damage. Do not use power tools for assembly of this product.

Step 1

This unit ships in 3 cartons (metal frames, cabinet & shelf, and sliding door
front) Unpack all cartons and associated hardware bags. Identify the parts
listed below. The assembly workspace should be a non-marring surface
such as carpet. For missing hardware pieces, contact BDI Customer
Service at: customerservice@bdiusa.com. For all other concerns, please
contact your BDI retailer.
Designed by Jeff Bare.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Margo & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2019, BDI
Made in China. 8.06.2019 V7
5201
™
A1 Left Shelf Frame x 1
A2 Right Shelf Frame x 1
bdiusa.com
customerservice@bdiusa.com
C3 Door Facia x 1

Component List

T1 Hex Driver x 1
T2 Small Hex wrench x 1
T3 Leveler wrench x 1
H1 M6 x 38 mm
Pan Head Screw x 12
H2 M6 x 12 mm
Pan Head Screw x 2
H3 Thumb Screw x 2
H4 Wall Anchor
Strap x 2
C1 Shelf x 3
C2 Cabinet x 1