BDI MILO 1055 Manual

MILO
MEDIA TABLE
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to
your BDI products. Register today, and you will be entered to win
free a BINK table from BDI: www.bdiusa.com/register
Placement and Maintenance
Your MILO Media Table is designed for indoor use on level floors.
Clean wood veneer, aluminum and steel parts with a moist cloth.
Milo is engineered for easy assembly. Carefully follow this
procedure to prevent any damage. Do not use power tools for
assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly
workspace should be a non-marring surface such as carpet.
For missing hardware pieces, contact BDI Customer Service at:
customerservice@bdiusa.com.
For all other concerns, please contact your BDI retailer.
Designed by Louis A Lara.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Milo & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2018, BDI
Patent: www.bdiusa.com/ip
Made in China. 02.11.2020 V2
1055/1065
TM
bdiusa.com
customerservice@bdiusa.com
Tool Included:
T1 Hex Wrench x 1
H1 Flathead Screws x 4
C1 Top Panel x 1
A1 Mounting Plate x 1
A2 Post x 1
H1 Threaded Rods x 2
A3 Base x 1