Table of Contents
Advertisement
WARNING! The Switch should be wall-mounted horizontally, and make sure
the front panel is facing down. The Switch's side panels with ventilation slots
should not be facing up or down as this position is less safe.
2.4 Rack Mounting
The Switch can be mounted on an EIA standard size, 19-inch rack or in a wiring closet with other
equipment (see
rack using a rack-mounting kit.
Note: Make sure there is enough clearance between each equipment on the rack for air
circulation.
2.4.1 Installation Requirements
• Two mounting brackets.
Chapter 2 Hardware Installation and Connection
Table 1 on page
20). Follow the steps below to mount your Switch on a standard EIA
GS1350 Series User's Guide
29
- Quick Links:
- Reset the Switch
- Restore Button
- Web Configurator
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
