Access Control; Chapter 34 Access Control; Access Control Overview; What You Can Do - ZyXEL Communications GS1350 Series User Manual

34.1 Access Control Overview

This chapter describes how to control access to the Switch.
A console port and FTP are allowed one session each, Telnet and SSH share nine sessions, up to five Web
sessions (five different user names and passwords) and/or limitless SNMP access control sessions are
allowed.
Table 130 Access Control Overview
Console Port
One session
A console port access control session and Telnet access control session cannot coexist when multi-login
is disabled. See the CLI Reference Guide for more information on disabling multi-login.

34.1.1 What You Can Do

• Use the Access Control screen
• Use the SNMP screen
• Use the Trap Group screen
be sent to each SNMP manager.
• Use the User Information screen
with managers using SNMP v3 and associate them to SNMP groups.
• Use the Logins screens
Web Configurator at any one time.
• Use the Service Access Control screen
use to access the Switch.
• Use the Remote Management screen
"trusted computers" from which an administrator may use a service to manage the Switch.

34.2 Access Control Main Settings

Use this screen to display the main screen.
Click Management > Access Control in the navigation panel to display the main screen as shown.

Chapter 34 Access Control

Access Control

SSH Telnet
Share up to 9 sessions
(Section 34.2 on page
(Section 34.3 on page
(Section 34.3.1 on page
(Section 34.3.3 on page
(Section 34.4 on page
(Section 34.5 on page
(Section 34.6 on page
GS1350 Series User's Guide
268
C
H A P T E R
FTP Web
One session Up to 5 accounts
268) to display the main screen.
269) to configure your SNMP settings.
270) to specify the types of SNMP traps that should
272) to create SNMP users for authentication
274) to assign which users can access the Switch via
276) to decide what services you may
277) to specify a group of one or more
34
SNMP
No limit