Ipv6 Neighbor Discovery Setup - ZyXEL Communications GS1350 Series User Manual

Table 43 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Address Setup (continued)
LABEL
IPv6 Global
Address
Prefix Length
EUI-64
Add
Cancel
Clear
Index
Interface
IPv6 Global
Address/Prefix
Length
EUI-64
Delete
Cancel

8.10.8 IPv6 Neighbor Discovery Setup

Use this screen to configure neighbor discovery settings for each interface. Click the link next to IPv6
Neighbor Discovery Setup in the IPv6 Configuration screen to display the screen as shown next.
Figure 90 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Neighbor Discovery Setup
Chapter 8 Basic Setting
DESCRIPTION
Manually configure a static IPv6 global address for the interface.
Specify an IPv6 prefix length that specifies how many most significant bits (start from the left) in
the address compose the network address.
Select this option to have the interface ID be generated automatically using the EUI-64 format.
Click this to create a new entry.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the Save link on the top navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Click Clear to reset the fields to the factory defaults.
This is the interface index number. Click on an index number to change the settings.
This is the name of the IPv6 interface you created.
This field displays the IPv6 global address and prefix length for the interface.
This shows whether the interface ID of the global address is generated using the EUI-64 format.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Check the entries that you want to remove and then click Delete to remove the selected entries
from the summary table.
Click Cancel to clear the check boxes.
GS1350 Series User's Guide
115