12.1 Filtering Overview
This chapter discusses MAC address port filtering.
Filtering means sifting traffic going through the Switch based on the source and/or destination MAC
addresses and VLAN group (ID).
12.1.1 What You Can Do
Use the Filtering screen
12.2 Configure a Filtering Rule
Use this screen to create rules for traffic going through the Switch. Click Advanced Application > Filtering
in the navigation panel to display the screen as shown next.
Figure 113 Advanced Application > Filtering
Chapter 12 Filtering
(Section 12.2 on page
142) to create rules for traffic going through the Switch.
GS1350 Series User's Guide
142
C
H A P T E R
Filtering
12