Neighbor Detail - ZyXEL Communications GS1350 Series User Manual

Table 22 Status > Neighbor (continued)
LABEL
Reset to Default
Flush

7.2.2 Neighbor Detail

Use this screen to view detailed information about the neighboring devices. Device information is
displayed in gray when the neighboring device is currently offline.
Up to 10 neighboring device records per Ethernet port can be retained in this screen even when the
devices are offline. When the maximum number of neighboring device records per Ethernet port is
reached, new device records automatically overwrite existing offline device records, starting with the
oldest existing offline device record first.
Click the Neighbor Detail link in the Status > Neighbor screen to see the following screen.
Figure 67 Status > Neighbor > Neighbor Detail
The following table describes the fields in the above screen.
Table 23 Status > Neighbor > Neighbor Detail
LABEL
Local Port
Desc.
Chapter 7 Status
DESCRIPTION
Click the Reset button to reset the neighboring device to its factory default settings. A
warning message "Are you sure you want to load factory default?" appears prompting you
to confirm the action. After confirming the action a count down button (from 5 to 0) starts.
Note:
• The Switch must support power sourcing (PSE) or the network device is a powered
device (PD).
• If multiple neighbor devices use the same port, the Reset button is not available.
• You can only reset Zyxel powered devices that support the ZON utility.
Select an entry's check box to select a specific port. Otherwise, select the check box in the
table heading row to select all ports.
Click the Flush button to remove information about neighbors learned on the selected
ports.
DESCRIPTION
This shows the port of the Switch, on which the neighboring device is discovered.
This shows the port description of the Switch.
GS1350 Series User's Guide
86