Table of Contents
Advertisement
About this document
1
History of changes
1.4 History of changes
Version
Edition date
k
2019-10-16
j
2018-02-01
i
2016-02-23
h
2015-09-02
g
2014-05-05
f
11.2007
e
09.2007
d
07.2007
c
09.2006
b
01.2005
a
01.2004
8 | 54
The reference document's version applies to all languages into which the reference
document is translated.
The first edition of a language version or a country variant may, for example, be
version 'd' instead of 'a' if the reference document is already this version.
The table below shows this document's revision history:
Brief description
●
Information about seal FDMP223 added in the 'Accessories', 'Installation', and
'Technical data' chapters
●
'Accessory' chapter: Cable gripper (1-hole) replaced by cable gripper (2-hole)
●
Changes in the 'Technical data' chapter
●
Changes in the 'Technical data' chapter
●
New door used for all manual call points
●
'Replacing the glass insert' chapter revised
●
2-hole cable grippers removed from accessories available to purchase
●
Intended use added
●
Editorial changes
V-pins removed from text and accessories
Mounting height changed from 1.3...1.6 m to 0.9...1.6 m
Data sheet updated in 'Applicable documents' chapter
FDM221 removed from the document and included in document 009757.
Housing FDMH297-R added.
Accessories and spare parts added and restructured.
Document edited.
Change to date format in line with ISO 8601 specifications (yyyy-mm-dd format).
FDM223H and FDM224H in text and added with graphics
FDMH292/3-x IP64 -> IP65
Standards added
Diagnosis levels adapted
Technical terms added.
Supplements in the Technical data:
- Line separator
- IP protection categories
- Standard EN 54-17
- VdS and LPCB approvals added
FDM224 included
Diagnosis levels added
Name of division
First edition
007002_k_en_--
Hide quick links:
Advertisement
Table of Contents
