Attaching The Window Sign - Siemens FDM223 Technical Manual

5.6 Attaching the window sign

007002_k_en_--
If you are using housing FDMH292-R, the printed window sign may be covered
with a self-adhesive sticker that has been supplied.
Observe local regulations for using the self-adhesive sticker! Only use the self-
adhesive sticker supplied if local regulations require the manual call point to be
labeled in this way.
w
The manual call point must be labeled with 'Fire detector' or 'Fire brigade'.
1. Clean the adhesive surface on the door.
2. Stick a self-adhesive sticker to the door of the manual call point as shown in
the diagram below.
a The manual call point has a new label.
Figure 19: Attaching a self-adhesive sticker to the housing FDMH292-R
See also
2
Installation [➙ 31]
Mounting / Installation
Attaching the window sign
5
37 | 54