Advertisement
Quick Links
For 2in Receivers Hitches and Class II Minimum Tow Rating.
Weighs 160 lbs empty. Rated for up to 300 lbs of cargo payload.
For product updates and to register your product, visit the LetsGoAero.com/registration
For More Information & Accessories, Visit our Website - www.LetsGoAero.com
For Technical Support & Product Questions Contact Us at 877-464-2376 or 719- 630-3800
NOTICE: All Manual information is subject to change without notice. Revised editions
will be available for free download at LetsGoAero.com. Manual information is considered
factual until made obsolete by a revised version.
Follow this QR-Code or visit
LetsGoAero.com/manuals to check for an updated version:
Copyright© 2019, Lets Go Aero, Inc., All rights reserved.
GearSpace-121219Rev
PRODUCT MANUAL
Installation & Safe Use Operation Highlights
Email: Support@LetsGoAero.com
GearSpace® Cargo Carrier
34. cu. ft. Slide Out Mount System
Part No. HGK819 & HGK826
Patent Numbers 6,409,203; 6,609,725; D717718 Patents Pending
Page 1 of 6
Revision Date: 12/12/19
Advertisement
Related Manuals for Let's Go Aero GearSpace HGK819
Summary of Contents for Let's Go Aero GearSpace HGK819
- Page 1 GearSpace® Cargo Carrier 34. cu. ft. Slide Out Mount System Part No. HGK819 & HGK826 PRODUCT MANUAL Installation & Safe Use Operation Highlights For 2in Receivers Hitches and Class II Minimum Tow Rating. Weighs 160 lbs empty. Rated for up to 300 lbs of cargo payload. For product updates and to register your product, visit the LetsGoAero.com/registration For More Information &...
- Page 2 TWINTUBE® SPINE ASSEMBLY AND INSTALLATION Qty. Description Hitch Up & GO Overview: TwinTube® Spine - Install TwinTube Spine on Hitch Retainer clip - Secure to hitch with Silent Hitch Pin® 5/8” Silent Hitch Pin ® 5/8” hand-Tighten Silent Hitch Pin ® 5/8”...
- Page 3 STEP 3 By rubbing, use the Wax Block [K] to apply Wax to all four sides of both tubes. Verify two Rubber Bumpers [J] (one onto each fixed tube) of the Twintube Spine [A] are factory installed. If you are missing any items or have assembly and installation questions, please contact Let’s Go Aero technical support at 1-877-GO- 4-AERO or 719-630-3800...
- Page 4 STEP 5 Attach the carabiner to the Safety Cable (if not already pre-installed). From underneath the carrier, connect the carabiner end of the Safety Cable to the “1st Position” hole in the frame of the TwinTube [A]. 1ST POSITION NOTE: The Safety Cable can be secured in two positions. Secure the Safety Cable to the first position.
- Page 5 Operating GearSpace Lids IMPORTANT! ALWAYS use handles located on top of each lid when opening and closing lids. Failure to do so causes lids to slam from weight force and unnecessary wear and tear. Lighting Connect the 4-flat wire plug to vehicle trailer lighting. Check running lights, brake lights, and turn signals before operation.
- Page 6 Limited Lifetime Warranty If a Let’s Go Aero bike rack is found to have a defect in workmanship or material over the lifetime of the original purchaser, Let’s Go Aero will repair or replace the defect free of charge. This warranty terminates if a purchaser transfers the product to any other person. The warranty does not cover damage or wear which occurs as a result of day to day use or general wear and tear.
Need help?
Do you have a question about the GearSpace HGK819 and is the answer not in the manual?
Questions and answers