sparkfun Tinker Kit Experiment Manual page 59

experiment you will send serial data the other direction – to the RedBoard!
What data will you be sending? Comma-separated RGB values to change
the color of your RGB, of course!
Let's see what pot of gold lies on the other end of this data rainbow!
Parts Needed
You will need the following parts:
• 1x Breadboard
• 1x SparkFun RedBoard
• 1x Common Cathode RGB LED
• 3x 330Ω Resistors
• 6x Jumper Wires
Didn't Get the Tinker Kit?
If you are conducting this experiment and didn't get the Tinker Kit, we
suggest using these parts:
SparkFun RedBoard -
Programmed with Arduino
 DE V- 12757
LED - RGB Clear Common
Cathode
 COM- 00105
Resistor 330 Ohm 1/6 Watt
PTH - 20 pack
 COM- 11507
Breadboard - Self-Adhesive
(White)
 PRT-12 002
Jumper Wires - Connected
6" (M/M, 20 pack)
 PRT-12 795
Page 59 of 63