Dynojet PCV F/I Installation Instructions Manual page 4

FIG.D
FIG.E
FIG.F
Rear Inj
22-035 www.powercommander.com
9
CPS
10 Plug the pair of matching PCV connectors in-line of the stock CPS connectors
11 Locate and unplug the stock wiring harness from the Front and Rear Cylinder
Front Inj
Locate and unplug the stock Crank Position Sensor connectors (Fig. D).
This connector pair is located just above the front sprocket cover.
(Fig. E).
Fuel Injectors, located directly on top of the intake manifold (Fig. F).
2014-2017 Yamaha Bolt 950 & SCR950 - PCV F/I - 4