Dynojet PCIII USB Installation Instructions

2 0 0 5 Tr i u m p h D a y t o n a 6 5 0

Parts List

1 Power Commander
1 USB Cable
1 CD-ROM
1 Installation Guide
1 Power Adapter
2 Power Commander Decals
2 Dynojet Decals
2 Velcro Strip
®
1 Alcohol Swab
1 Dynojet O2 controller
The ignition must be turned off before installation.
After turning off the ignition make sure not to dis-
connect anything for at least one minute.
thing is disconnected while the CDI is powering
down a check engine light may be indicated.
do not turn on the ignition while one of the electri-
cal connectors is unplugged.
light is indicated the code can only be cleared by
a Triumph dealer.
You can also download the Power
Commander software and latest maps
from our web site at:
www.powercommander.com
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com
i511-411 www.powercommander.com
I n s ta l l a t i o n I n s t r u c t i o n s
Button Adjustment Display
If some-
Also
If a check engine
Faceplate Buttons
Expansion Port
2005 Triumph Daytona 650 - PCIII USB - 1
USB Port