ICP DAS USA M2M-710D User Manual page 26

Hide thumbs Also See for M2M-710D:
  • Faq (8 pages)
Table of Contents

Advertisement

Boot Protocol: Static
IP /DHCP
IP Address
Net Mask
Gateway
DNS Server
Client mode:
System
Host Name
Connect to Server by:
IP / DNS
Server name
Server IP
Communication Port
Boot Protocol: Static
IP /DHCP
IP Address
Net Mask
Gateway
DNS Server
M2M-710D User Manual (Version 1.00, Mar/2009)
M2M-710D supports two kinds of IP modes; they are
"Static IP" and "DHCP". The user can choose one of these
modes to set the IP address of M2M-710D.
When Boot Protocol is "Static IP", the user can set IP
address of M2M-710D in this setting.
When Boot Protocol is "Static IP", the user can set subnet
mask of M2M-710D in this setting.
When Boot Protocol is "Static IP", the user can set
gateway of M2M-710D in this setting.
When Boot Protocol is "Static IP", the user can set DNS
server of M2M-710D in this setting
There are 2 operation modes in M2M-710D. They are
"Server" and "Client". The user can set the M2M-710D to
be a server or client in this page. When the M2M-710D
plays the role of client, it will try to connect with the
server. When the M2M-710D plays the role of server, it
will wait client to link.
For the module name
The setting can provide the client to connect with the
server by IP or DNS of the server
The user can set the DNS of the server that the client
wants to connect to.
The user can set the IP address of the server that the client
wants to connect to.
The user can set the port number of the server that the
clients want to link in this setting. The factory setting is
"443".
M2M-710D supports two kinds of IP modes; they are
"Static IP" and "DHCP". The user can choose one of these
modes to set the IP address of M2M-710D.
When Boot Protocol is "Static IP", the user can set IP
address of M2M-710D in this setting.
When Boot Protocol is "Static IP", the user can set subnet
mask of M2M-710D in this setting.
When Boot Protocol is "Static IP", the user can set
gateway of M2M-710D in this setting.
When Boot Protocol is "Static IP", the user can set DNS
server of M2M-710D in this setting
PAGE:23

Advertisement

Table of Contents
loading

Table of Contents