ICP DAS USA M2M-710D User Manual page 31

2. DDNS Config:
DDNS
Host Name
User Name
Password
3.3.5 Com Port Config
The user can set com port setting of M2M-710D in this page. If com port setting of the
server and client is different, Com port setting of the client will be covered by the server.
When the user changes the setting in this page, the user must restart the M2M-710D to
active the new setting.
Port
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
M2M-710D User Manual (Version 1.00, Mar/2009)
Disable / Enable
The user can enable or Disable DDNS
function by this setting
It is the hostname that user creates in
DynDNS website (ex:
icpdas.homelinux.com)
It is the name of the user account in
DynDNS website.
It is the password of the user account in
DynDNS website.
Figure 29 DDNS Config page
RS232 / RS485 Select com port connection from
RS-232 or RS-485.
1200 / 2400 / 4800 / 9600 / 19200 / 38400 /
57600 / 115200 bps
5 / 6 / 7 / 8 data bits
None / Odd / Even
1 / 2 stop bits
None / Hardware / XonXoff
PAGE：28