Q8. Client Can't Connect To Server - ICP DAS USA M2M-720-A Faq

Q8. Client can't connect to Server.

A8. Please follow the steps to check the network configurations are all
correct.
Step1: Confirm the IP of Server and Client is the only. The IP is not
the same with the other network device.
Step2: Please confirm the following settings are all correct.
"Server IP(*)" of client is the same with "IP Address" of
server.
"Communication Port" of server and client are the same.
"Operation Mode" of client is "VSoIP Client".
"Operation Mode" of server is "VSoIP Server".
Client's "Standard Config" webpage
M2M-720-A FAQ (Version 1.20, Oct/2012) PAGE：11