1. Manuals
  2. Brands
  3. ICP DAS USA Manuals
  4. TV Tuner
  5. M-4132
  6. User manual

ICP DAS USA M-4132 User Manual

Hide thumbs Also See for M-4132:
Table of Contents

Advertisement

Quick Links

Download this manual
TM
M - 4 1 3 2
User's Manual
Version 1.60
M-4132 User Manual (Version 1.60, May/2014)
PAGE：1

Advertisement

Table of Contents
loading

Related Manuals for ICP DAS USA M-4132

Summary of Contents for ICP DAS USA M-4132

  • Page 1 M - 4 1 3 2 User’s Manual Version 1.60 M-4132 User Manual (Version 1.60, May/2014) PAGE：1...
  • Page 2 Copyright 2014 by ICP DAS. All rights are reserved. Trademark The names used for identification only may be registered trademarks of their respective companies. List of Revision Date Author Version Revision 2014/05/22 Raiden 1.60 Release M-4132 User Manual (Version 1.60, May/2014) PAGE：2...

  • Page 3: Table Of Contents

    5. VxComm Applications……………………………………………… 52 5.1 Introduction ..................52 5.2 Architecture ..................52 5.3 Installing the VxComm Driver ............53 5.4 VxComm communication test ............56 6. Troubleshooting……………………………………………………...58 7. FAQ…………………………………………………………………. 59 8. Dimensions………………………………………………………….. 70 M-4132 User Manual (Version 1.60, May/2014) PAGE：3...

  • Page 4: Introduction

    Introduction The M-4132 module is specially designed for the remote maintenance solution with voice streaming. This module provides 2 major technologies on networking: Voice streaming and Pair connection functions. The Pair connection means that the user can operate remote COM port device via...

  • Page 5: Features

    ● Provide pair connection (RS-232,RS-485) on network ● Support server and client function. ● Server mode can manage max 64 clients. (Clients can be M-4132, ● M2M-720-A, M2M-710D..) Support voice broadcast function in server mode. ● Support Virtual COM technology ●...

  • Page 6: Hardware Specifications

    Data Format: 5/6/7/8 data bits, None/Odd/Even parity bit, 1/2 stop bit Power Unregulated +10V ~ +30V DC requirement Power consumption 2.5W Environmental Operating temperature: -20 ~ 60 ºC Storage temperature: -25 ~ 85 ºC M-4132 User Manual (Version 1.60, May/2014) PAGE：6...
  • Page 7 ESD protection: 2500V CE/FCC, EMI, RoHS compliance Dimensions 160 x 135 x 44 (mm) M-4132 User Manual (Version 1.60, May/2014) PAGE：7...

  • Page 8: Hardware

    2. Hardware 2.1 Pin Assignment Figure 3: Pin assignment of M-4132 Table 1: 7-pin screw terminal block Name Description T.GND GND of trigger input Trig Trigger input Data+ of RS-485 Data- of RS-485 V+ of Power Supply (+10 to +30VDC) GND of Power Supply F.G.
  • Page 9 Received Data Transmitted Data Data Terminal Ready Signal Ground/Common Data Set Ready Request to Send Clear to Send Table 4: 3.5mm Phone Jack (Speaker Out) Name Description Ground Left channel Ring Right channel M-4132 User Manual (Version 1.60, May/2014) PAGE：9...

  • Page 10: Wiring Instructions

    When connecting the M-4132 to a DTE device, the user needs to use a crossover cable (TX crosses to RX, GND to GND,), as shown in the figure 4, 5.
  • Page 11 Ethernet connection The M-4132 module is based on a client-server architecture model. When the M-4132 works as a server in Internet, it should set the firewall before the M-4132 module appropriately or else the client will not connect to the server.

  • Page 12: Dip Switch And Trigger Button

    Figure 7: Ethernet connection 2.3 Dip Switch and Trigger button The M-4132 provides two switches (SW1, SW2) and a trigger button (TB). These switches and button can decide initial function of the system after power on and enable/disable the request to connect. The descriptions are shown in table 6, 7.
  • Page 13 IP and To press the TB about 40 information from Com Port(RS-232). version second after power on Normal state; It will not change any Normal setting The other states setting and data. M-4132 User Manual (Version 1.60, May/2014) PAGE：13...

  • Page 14: Led Status Indicators

    Client: request server to connect. Enable the request SW1=ON to connect Press the TB 2.4 LED Status Indicators The M-4132 provides three LEDs to indicate the status, as shown below. Figure 9: LED indicator Table 8: LED status description Name Status Description Power supply is ok.

  • Page 15: Communication Port

    2.5 Communication Port M-4132 uses several communication ports of Ethernet, as shown in the below. If the user connects M-4132 client by “ETM operation mode”, the communication ports will include the ports of “ETM configuration file”. Table 9: Communication Port...

  • Page 16: Configuration And Operation With Web Browser

    3.1 Connection Setting Before you open the web browser to configure the module, it needs to connect the M-4132 and your PC to the same sub network or same Ethernet Switch (as shown in figure 10) and set network settings (such as IP/Mask/Gateway) of the PC.
  • Page 17 Figure 11: click “start->Settings->Network Connections” 2. Double click “Local Area Connection” icon 3. click “Properties” button Figure 12: click “Properties” button M-4132 User Manual (Version 1.60, May/2014) PAGE：17...
  • Page 18 Step 2: Set “Internet Protocol Properties” and then click “OK” button. The settings must have the same domain and different IP with the M- 4132. (ex: M-4132’s default IP = 192.168.1.217, PC’s IP = 192.168.1.210). Figure 14: set “Internet Protocol Properties”...
  • Page 19 3. key in “ping 192.168.1.217” and click “Enter”. If the response message shows “Request timed out”(figure 17), it means the network settings between PC and the module are not correct. Please check the network is available and the settings are all correct. M-4132 User Manual (Version 1.60, May/2014) PAGE：19...

  • Page 20: Web Configuration-Function Menu

    If the network settings are correct, it will show “Packets: Sent=4, Received=4, Lost=0“(figure 18). Figure 18: Ping IP OK 3.2 Web Configuration—function menu Now the PC is set completely and working well with the M-4132. Please M-4132 User Manual (Version 1.60, May/2014) PAGE：20...
  • Page 21 “Enter” key to link the M-4132, as shown in figure 19. Figure 19: Web Configuration page When the browser connects with the M-4132, Figure 19 is the first page. The left side is the function menu and the other is the setup page in the first page.

  • Page 22: Web Configuration-Setup Page

    Comm Operation Etm Operation Network Tools Information Reboot The “Reboot” button can provide the user to restart the M-4132. 3.3 Web Configuration—setup page 1、Login：The user login and logout interface Figure 20: user login page M-4132 User Manual (Version 1.60, May/2014)
  • Page 23 “Hour(2 digits):Minute(2 digits):Second(2 digits)”. The user can get current date and time of M-4132 by click “Refresh” button and set date and time from the PC by click “Setting” button. M-4132 User Manual (Version 1.60, May/2014)
  • Page 24 The M-4132 has 2 operation modes. They are “VSoIP Server” and “VSoIP Client”. The user can set the M-4132 to be a server or client in this page. When the M-4132 plays the role of client, it will try to connect with the server.
  • Page 25 Boot Protocol：Static IP / DHCP / ADSL Connection M-4132 supports three kinds of IP modes, they are “Static IP”, “DHCP” and “PPPoE (ADSL)”. The user can choose one of these modes to set the IP address of M-4132 when booting. 4. Static IP Config a.
  • Page 26 ISP (Internet Service Provider). Figure 24: Standard Config page 5、DDNS Config：When the M-4132 plays the role of server and Boot Protocol isn’t “Static IP”, the client may not connect with the server, because the IP address of the server is floating, not static. We provide a solution for this situation.
  • Page 27 Key in “user name” and “password” and click “Login” button. If the user has not created user account, please click “Create Account” Hyperlink to create user account and then login user account. Figure 25: DynDNS home page M-4132 User Manual (Version 1.60, May/2014) PAGE：27...
  • Page 28 Click “Services” Hyperlink to enter Services page Figure 26: click ”Services” Hyperlink d. Click “Dynamic DNS” Hyperlink to enter Dynamic DNS page Figure 27: click ” Dynamic DNS” Hyperlink M-4132 User Manual (Version 1.60, May/2014) PAGE：28...
  • Page 29 Key in and select your hostname (ex: icpdas.home linux.com ), and key in IP address of the server. Don’t care the other settings and click “Create Host” button. Figure 29: Add New Hostname M-4132 User Manual (Version 1.60, May/2014) PAGE：29...
  • Page 30 User Name：It is the name of the user account in DDNS service provider. e. Password：It is the password of the user account in DDNS service provider. Figure 31: DDNS Config page M-4132 User Manual (Version 1.60, May/2014) PAGE：30...
  • Page 31 6、Com Port Config：The user can set com port setting of M-4132 in this page. If com port setting of the server and client is different, Com port setting of the client will be covered by the server. When the user changes the setting in this page, the user must restart the M- 4132 to active the new setting.
  • Page 32 3. Input Volume：0~10 The maximum input volume is 10. Figure 33: Audio Config page 8、ETM Config：The user can set ETM settings of M-4132 in this page for Ethernet through mode. 1. Target IP： Set IP address of the target device (ex: PLC). M-4132 client will connect to target device by this IP.
  • Page 33 “Login list”. After the user clicked “Start Scan” button, the “Start Scan” button will become to “Stop Scan” button and M-4132 will enable “Port Scan” function. After the procedure of “Port Scan” finished, the “Stop Scan” button will become to “Start Scan” button again.
  • Page 34 Figure 35: Port Setting page Figure 36: Port Scan page M-4132 User Manual (Version 1.60, May/2014) PAGE：34...
  • Page 35 SetStatus ： The user can set current communication parameters from this button. 2. Operation：The settings will only show in page of the server. If you want to refresh the status in this page, you can click M-4132 User Manual (Version 1.60, May/2014) PAGE：35...
  • Page 36 “GetStatus” button. a. Your Status：Show status of M-4132 Idle Mode： The voice and com port connection have not established yet. Broadcast Connection Mode： All clients will hear the voice from microphone of the server via Ethernet. Broadcast & Pair Mode：...
  • Page 37 “Broadcast Connection” command to M-4132 by this button. f. “Broadcast & Pair” button：The user can send “Broadcast & Pair Connection” command to M-4132 by this button. The user must select name of the client from “Login list” before click this button.
  • Page 38 Quality：2~10 Select the audio quality. b. Target IP： Set IP address of the target device (ex: PLC). M-4132 client will connect to target device by this IP. c. Configure file：Configure1~8 Select configuration file. When the M-4132 server, client and target device operate at ETM operation mode, they will connect by the configuration file.
  • Page 39 2. Operation：The settings will only show in page of the server. If you want to refresh the status in this page, you can click “GetStatus” button. a. Your Status：Show status of M-4132. Please refer to section 3.3 “Web Configuration” “Comm Operation”...
  • Page 40 “Remote Image” to watch the live image of the client. note1: M-4132 has not video interface. note2: The user must enable JavaScript firstly in your web browser to show image on PC.
  • Page 41 Figure 40: Remote Image page 12、Event Log：It will show the event log that clients login and connection break. To clear the event log can click “Clear Log” button. Figure 41: Event Log page M-4132 User Manual (Version 1.60, May/2014) PAGE：41...
  • Page 42 8. “Mail Server Setting” button：The user can link “Mail Server Setting” page by this button. The description is shown below about “Mail Server Setting” page. a. Mail Server：Set URL of mail server. Mail server is “smtp.gmail.com”, if you use Gmail. M-4132 User Manual (Version 1.60, May/2014) PAGE：42...
  • Page 43 “SendMail test” button ： For testing the mail server settings. If they are all correct, it will show “Send Mail success” message after the user click the button. l. “Return” button：Return to the “Event Report” page. M-4132 User Manual (Version 1.60, May/2014) PAGE：43...
  • Page 44 3. Trace Route Command：This command can help user to trace the route IP packets follow going to ‘device’. 4. Bandwidth Test Command：This command can help user to measure the bandwidth between server and client. M-4132 User Manual (Version 1.60, May/2014) PAGE：44...
  • Page 45 Figure 44: Network Tools page Figure 45: Ping Command page Figure 46: ARP Command page M-4132 User Manual (Version 1.60, May/2014) PAGE：45...
  • Page 46 Figure 47: Trace Route Command page Figure 48: Bandwidth Test Command page 15、Information： 1. OS Version：Show OS version. 2. Firmware Version：Show application program version. M-4132 User Manual (Version 1.60, May/2014) PAGE：46...
  • Page 47 4. Subnet Mask：Show current subnet mask. 5. Mac Address：Show current Mac address. 6. License Verify：Show the result that the license is verified. If it shows “OK”, it means the licence is passed. Figure 49: Information page M-4132 User Manual (Version 1.60, May/2014) PAGE：47...

  • Page 48: Application

    4132s which are setting as Server and Client separately setup a virtual channel over Ethernet or Internet that allow bi-directional voice and serial (RS-232 or RS-485) data to pass through, as shown in figure 50, Figure 50: Pair connection (one server to one client) M-4132 User Manual (Version 1.60, May/2014) PAGE：48...

  • Page 49: Broadcast Connection

    Figure 51: Pair connection (one server to more clients) 4.2 Broadcast Connection A server can connect with one or more clients in this application. Voice collected from the server’s MIC will transfer to all clients’ speakers over Ethernet or Internet M-4132 User Manual (Version 1.60, May/2014) PAGE：49...

  • Page 50: Etm Operation

    In this mode, the user’s application programming (ex: PLC editor) can connect to remote device (ex: PLC) by server and client. The remote device doesn’t need any real IP at this application. M-4132 User Manual (Version 1.60, May/2014) PAGE：50...
  • Page 51 Figure 53: ETM Operation M-4132 User Manual (Version 1.60, May/2014) PAGE：51...

  • Page 52: Vxcomm Applications

    5.1 Introduction Using the VxComm (Virtual Com) technology, PC can create virtual Com Ports to map the Com Port of the M-4132. To use the VxComm application, users must install a VxComm Driver first. After installation, users can operate the virtual Com Port as a real Com Port in PC to access the serial devices connects to the M-4132.

  • Page 53: Installing The Vxcomm Driver

    Step 2: Go the where you download the installation file, and then double-click the file in Windows to execute it. Figure 55: VxComm Driver install Step 3: From the Windows Start Menu, go to Program/ICPDAS /VxComm2K/ and click the VxComm Utility. M-4132 User Manual (Version 1.60, May/2014) PAGE：53...
  • Page 54 Figure 56: VxComm Utility location Step 4: Search and add M-4132 VxComm Server. Figure 57: Search and add M-4132 VxComm Server Step 5: Double click Port1 to open “Port Configuration” dialog and select an appropriate Com Port number. M-4132 User Manual (Version 1.60, May/2014)
  • Page 55 Figure 58: Select Com Port number Step 6: Reset VxComm Driver to make the settings effectively Figure 59: Reset VxComm Driver M-4132 User Manual (Version 1.60, May/2014) PAGE：55...

  • Page 56: Vxcomm Communication Test

    5.4 VxComm communication test Step 1: Connect M-4132 Server, Client and PC, as shown below. Figure 60: Communication Architecture Step 2: Configure M-4132 Server’s Port1 to PC’s Com2 by VxComm Utility, please refer to section 5.3 for detail. Step 3: Set “Local Port” = VxComm, “Remote Port” = RS232, select M- 4132 Client and then click “Pair Connection”...
  • Page 57 /7188e/tcp/pcdiag/source/send232.vb6_2.0.1) to test VxComm communication. Please open 2 Send232 Applications. One uses Com1 (connect with M-4132 Client), the other uses Com2 (provide by VxComm driver). When the user clicks “Send” button to send the message, the receive text box of the other will show the message.

  • Page 58: Troubleshooting

    6. Troubleshooting The troubleshooting list can help users to resolve the problems when using the M-4132. If the problem still can't be solved, please contact with the technical staff of ICP DAS. Table 10 Errors and solutions Item Trouble state...

  • Page 59: Faq

    7. FAQ Q1: If I forget the M-4132’s IP, how can I set and operate the M-4132 by web browser? A1: You should get M-4132’s IP first. It has two ways to get the IP, as shown below. I. Recover default IP provisionally.
  • Page 60 3.3 to login and then set network setting of M-4132 at “Standard Config” page. II. Print current IP from Com Port (RS-232). Step 1: Connect PC and the M-4132 by RS-232 cable. M-4132 User Manual (Version 1.60, May/2014) PAGE：60...
  • Page 61 Step 2: Open Com Port program. We used “Hyper Terminal” of Microsoft Window XP to test here. Step 3: Set communication setting of Com Port. (baud rate = 115200, data bits=8, parity=none, stop bits=1, flow control=none). M-4132 User Manual (Version 1.60, May/2014) PAGE：61...
  • Page 62 Step 4: Press Call icon. Step 5: Set SW1=OFF, SW2=OFF. Step 6: Press the Trigger Button about 40 second after power on. M-4132 User Manual (Version 1.60, May/2014) PAGE：62...
  • Page 63 Step 7: It will show M-4132’s IP in “Hyper Terminal”(ex: IP Address = 192.168.0.211). Step 8: Connect PC and the M-4132 by Ethernet Switch. Step 9: Please set PC’s Network settings. The settings must have the same domain and different IP with the M-4132 (ex: IP=192.168.0.210, mask=255.255.255.0).
  • Page 64 A2: Please follow the following steps to check that the network configuration is correct. Step 1: Check IP of Server and Client is the only. The IP is not the same with the other network device. M-4132 User Manual (Version 1.60, May/2014) PAGE：64...
  • Page 65 “Server IP(*)” of Client is the same with “IP Address” of Server. “Communication Port” of Server and Client are the same. “Operation Mode” of Client is “VSoIP Client”. “Operation Mode” of Server is “VSoIP Server”. M-4132 User Manual (Version 1.60, May/2014) PAGE：65...
  • Page 66 The user can open web browser and key in http://ip/cgi- bin/Ping.cgi (ex: http://192.168.0.211/cgi-bin/Ping.cgi) in the Address line and press “Start” button to test the network. If the network is available, it will show “0% packet loss”. M-4132 User Manual (Version 1.60, May/2014) PAGE：66...
  • Page 67 Client in the “Login list” at Server’s “Operation Mode” page.. Step 2: Confirm Server and Client are at “Pair Connection” mode and it shows “Your Status: Pair Connection with Client (IP)” at Server’s “Operation Mode” page. M-4132 User Manual (Version 1.60, May/2014) PAGE：67...
  • Page 68 Server’s “Operation Mode” page Step 4: Confirm the Cable connected Server/Client to Com Port device is wired correctly. If the connection is RS485, the user M-4132 User Manual (Version 1.60, May/2014) PAGE：68...
  • Page 69 Depending on the signal state it might sometimes work, other times it might not. Here we connect the M-4132 and the Com Port device via handshake looped to avoid the Com Port device waits handshake line signals, as shown in below.

  • Page 70: Dimensions

    8. Dimensions (Unit: mm) M-4132 User Manual (Version 1.60, May/2014) PAGE：70...

Table of Contents