ICP DAS USA M2M-720-A Faq page 23

Key=>_userkey(default)
NetWork
Host Name=>720AServer
Connect to Server by=>IP(default)
Server IP=>192.168.1.217(default)
Server DNS=>www.serverdns.com(default)
Communication Port=>443(default)
VPN=>Disable(default)
Boot Protocol=>Static IP(default)
Static IP Config
IP Address=>192.168.1.217
Net Mask=>255.255.255.0
GateWay=>192.168.1.254
DNS Server=>168.95.1.1
ADSL Config
User Name=>user(default)
Password=>password(default)
Step10: the same with Step 5.
Step11: Check the led status of client (M-4132). If the SA1 led is flash
slowly, it means it is trying to establish the connection with the
server. If the SA1 led is off, it means the connection is OK.
If the SA1 led is flash slowly and continued over three minutes,
please recheck the settings are all correct.
Step12: Open the web page of Server (M2M-720-A) and Click "Etm
Config" link.
a. Set Target IP=>192.168.1.219, Configure file=>Configure1
b.Click "Save Setting" button
c. Click "Port Scan" button
M2M-720-A FAQ (Version 1.20, Oct/2012) PAGE：23