Routing Ffcs/Cables - Epson L565 Service Manual

Color
Hide thumbs Also See for L565:
Table of Contents

Advertisement

L565/L566 Series

2.4 Routing FFCs/cables

ADF Frame Assy / ADF Document Support
Grounding wire of the ADF Document Support
ADF Document Support
Bottom
Grounding wire of the ADF Document Support
Rotate the grounding wire of the ADF Frame Assy and ADF Document Support(x2) as follows.
Grounding wire of the ADF Frame Assy
Hang the grounding wire the dowel (x3) and route through the hole of the ADF Base.
Grounding wire of the ADF Document Support
1. Route along the rib A of the ADF Base and hang the dowel on the bottom of the ADF Base.
2. Route along the inside the hook and rib B of the ADF Base and route through the hole of the ADF Base.
Bottom of Scanner Carriage
Connector of Relay Board
Connector of CIS Module
Route the Scanner FFC as follows.
1. Insert the Scanner FFC through the hole of the Scanner Housing Lower in the direction shown above, and then secure the FFC with double-sided tape on
position with the standard shown in the figure above.
2. Route the FFC through the ribs (x7) of the Scanner Housing Lower taking care not to damage the FFC.
3. Route the FFC through the ribs (x5) on the bottom of the Scanner Carriage taking care not to damage the FFC.
4. Connect the Scanner FFC to the Relay Board and CIS Module as shown above.
Disassembly/Reassembly
ADF Document Support
Hook
Grounding wire of the ADF Frame Assy
Hole
ADF Base
Scanner FFC
Scanner Carriage
Standard for attaching double-sided tape
5 mm
Scanner FFC
ADF Hinge Left
ADF Frame Assy
Rib A
Rib B
Dowel
Route the grounding wire (x2) of the ADF Frame Assy/ADF Document
Support through the ADF Hinge Left as follows.
1. Route the grounding wire (x2) through the hole (x2) of the ADF Hinge Left.
2. Install the ADF Hinge Left to the ADF Base. Hang the grounding wire
(x2) on the rib (x2) of the ADF Hinge Left and route.
7.5 mm
20 mm
Relay Board
Double-sided tape
Rib
Hole
Route the Scanner Motor cable through the hooks (x4) of the Scanner Motor as shown above.
Secure the grounding wire of the Relay Board and the Scanner Motor together with the screw as show above.
Routing FFCs/cables
ADF Hinge Left
Bottom
Hole
Hole
Route the Scanner FFC
inserting the hole of the
Housing Left.
Housing Left
ADF Base
ADF Hinge Left
Grounding wire
Rib
Scanner FFC
Insert the hole of the Housing Left and connect the connector (CN11) of
the Main Board through the ferrite core.
Grounding wire (only ADF compatible model)
Insert the hole of the Housing Left and connect the frame of the FAX Assy.
Scanner Motor
Scanner Motor cable
Scanner Carriage
Revision A
ADF/Scanner Unit
Frame of FAX Assy
Ferrite core
Grounding wire
Scanner Motor
Screw it with
grounding terminal
Scanner Motor
C.B.P-TITE SCREW 3x10 F/ZN-3C (5 ± 1 kgf·cm)
53
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

L566

Table of Contents