Cleaning The Print Head; Connecting Cables - Epson TM-T90 User Manual

Cleaning the Print Head

After printing, the print head can be very hot. Be careful not to touch it
and to let it cool before you clean it. Do not damage the print head by
touching it with your fingers or any hard object.
Turn off the printer, open the roll paper cover, and clean the
thermal element of the print head with a cotton swab moistened
with an alcohol solvent (ethanol or IPA).
Epson recommends cleaning of the thermal head periodically
(generally every three months) to maintain receipt print quality.
.

Connecting Cables

To connect cables, first remove the
bottom of the cover as shown in the
illustration.
To place the cables, first break off by
hand any of the three portions
indicated by circles in the illustration
(the other portion is on the right). Then
put the cables through the holes and
replace the bottom of the cover.
CAUTION:
TM-T90 User's Manual 11
English