Pilz PMCtendo SZ Series Operating Manual page 52

Technical data
9.9 Type-specific data
9.9.1 Attachment conditions
The following technical data applies to the ideal energy configuration of a servo amplifier
and was determined under the following thermal attachment conditions:
Attachment of the synchronous servo motor with a steel bracket to a base plate
}
Minimum attachment surfaces between synchronous servo motor and steel bracket and
}
base plate in accordance with the subsequent table.
Type
SZ.3x − SZ.5x
SZ.7x − SZ.8x
Make sure that there are comparable thermal attachment conditions in your system.
Operating Manual PMCtendo SZ
1002405-EN-04
CAUTION!
Overheating!
Repainting the motor changes its thermal properties. The motor cannot be
operated with the nominal data.
– Preserve the finish of the motor (RAL 9005 jet black, matte).
Dimensions of steel mounting flange
(thickness x width x height)
23 x 210 x 275 mm
28 x 300 x 400 mm
Convection surface area
Steel mounting flange
0.16 m
2
0.3 m
2
52