Safety Instructions; Warranty And Liability; Part Of The Product; Intended Use - Pilz PMCtendo SZ Series Operating Manual

Safety instructions

2 Safety instructions
2.1

Warranty and liability

These devices can pose certain risks. For this reason, always comply with the safety infor-
mation listed in the following sections and points and with the technical rules and regula-
tions.
Warranty and liability claims are voided if:
The product was not used as intended
}
Damage can be traced back to noncompliance with the operating manual
}
Operating personnel are not properly trained
}
Changes of any kind have been made
}
2.2

Part of the product

The technical documentation is part of a product.
Always keep this operating manual at hand in the area of the device until disposal of the
product because it contains important information.
Hand over this operating manual in case of sale, transfer or rental of the product.
2.3

Intended use

The servo motors are intended for installation in machines or systems or for assembly with
other components into a machine or system. They must be operated in connection with ap-
propriate, correctly configured servo amplifiers (e.g. PMCtendo DD5 or PMCprotego D).
The thermal motor protection integrated in the motor winding must be monitored and evalu-
ated.
The following are considered non-intended use:
Direct connection to the supply grid
}
Any structural, technical or electrical change
}
Use outside of the areas described in this operating manual
}
Use deviating from the specified technical data
}
2.4

Qualified personnel

These devices can pose certain residual risks. Therefore all work on the device, as well as
its operation and disposal, may be performed only by qualified personnel who are aware of
the potential risks. Qualified personnel are persons who have acquired the authorization to
perform these tasks through professional training and/or instruction by specialists.
In addition, applicable regulations, legal provisions, technical standards, this technical doc-
umentation and especially the safety information contained within it must be read carefully,
understood and observed.
Operating Manual PMCtendo SZ
1002405-EN-04
6