Appendix C LEDs
The LEDs in
Table 37 LEDs at a glance
LEDs
MPU
LEDs:
x
Management Ethernet port LEDs
x
Fan LEDs
x
Card LEDs
x
MPU active/standby status LED
LPU
LEDs:
x
RJ-45 Ethernet port LED
x
SFP port LED
x
SFP+ port LED
x
XFP port LEDs
Switching fabric module LEDs
Fan tray status LEDs
Power supply LEDs
MPU LEDs
Figure 40
shows the LEDs available on the LSU1SUPA0 MPU for the A10500 switches.
Figure 40 LEDs on an LSU1SUPA0 MPU
(1) Management Ethernet port LEDs
(3) Card status LEDs
Management Ethernet port LEDs
The LSU1SUPA0 MPU has one LINK LED and one ACT LED to indicate the link status and data forwarding
status of the management Ethernet port.
Table 38 Management Ethernet port LED description
LINK
On
Table 37
are available for you to monitor module status on an A10500 switch.
ACT
Flashing
(2) Fan LEDs
(4) MPU active/standby status LED
Description
A link is present, and the management Ethernet port is receiving or
sending data.
72