Mounting Accessories; Transceiver Modules - HP A10500 Series Manual

Mounting accessories

Before installing the switch to the rack, install slide rails to the rack. You can order an HP X421 A-Series
Chassis Universal 4-Post Rack Mounting Kit (JC665A).
An HP X421 A-Series Chassis Universal 4-Post Rack Mounting Kit (JC665A) includes cage nuts, screws,
and a pair of slide rails. The length of the slide rails is in the range of 500 mm (19.69 in) to 800 mm
(31.50 in). A pair of slide rails can bear a maximum weight of 350 kg (771.60 lb). Before you use the
slide rails, make sure that the following requirements are satisfied:
x
The inside depth of the rack falls into the length range of the slide rail.
x
The slide rails can support the total weight of the switch chassis and its accessories.

Transceiver modules

The HP A10500 Switch Series support transceiver modules. You can order transceiver modules
according to the transceiver modules supported by the LPU interfaces. For more information, see
28.
The HP A10500 Switch Series supports the following transceiver modules:
x
10-Gigabit XFP modules listed in
x
10-Gigabit SFP+ modules listed in
x
10-Gigabit SFP+ cables listed in
x
Gigabit SFP modules listed in
x
100-Mbps SFP modules listed in
Table 32 XFP module specifications
Product
code
JD117B
JD108B
JD121A
JD107A
JG226A
Table 35
Description
HP X130 10G XFP LC SR
Transceiver
HP X130 10G XFP LC LR
Transceiver
HP X135 10G XFP LC ER
Transceiver
HP X130 10G XFP LC ZR
Transceiver
HP X180 10G XFP LC LH
80km 1538.98nm
DWDM Transceiver
Table 32
Table 33
Table 34
Table 36
Central
Fiber
wavelength
diameter
(—m)
(nm)
50/125
850
62.5/125
1310 9/125
1550 9/125
1550 9/125
1538.98 9/125
67
Multimode fiber
Max
modal
transmission
bandwidth
distance
(MHz*km)
300 m (984.25
2000
ft)
500 82 m(269.03 ft)
400 66 m(216.54 ft)
220 33 m (108.27 ft)
160 26 m (85.30 ft)
10 km (6.21
N/A
miles)
40 km (24.86
N/A
miles)
80 km (49.71
N/A
miles)
80 km (49.71
N/A
miles)
Table