Start Or Stop Accessories; Notifications - L.A. Spas In-Fit 13 SL Manual

Start or Stop Accessories

To start or stop an accessory, touch the as-
sociated icon. Icons will become animated
when their accessory is use, animation will
stop when turned off. Icons on the screen
will reflect the speed or state of the devices
running on your spa. When an accessory
has more than two speeds press the button
until it reaches the desired speed.

Notifications

A notification area at the top right-hand side
of the screen shows the state of certain
accessories that comes with the spa.
Notification Icons:
in.touch:
• Indicates that the in.touch module is
detected and connected to a Wi-Fi
network
• A red cross indicates that the in.touch
module is detected but isn't connected
to a Wi-Fi network. For more infor-
mation about the in.touch, refer to the
Wi-Fi section (p. 30)
in.stream 2:
• Indicates that the in.stream 2 module
is detected and connected.
• A grey icon indicates that the in.stream
2 module is detected but is off.
Reference separate Audio Set-Up Guide
for details on using your in.stream &
in.stream2 audio system.
In-Fit Exercise Pools
Accessories
21