Water Temperature; Home Page; Settings - L.A. Spas In-Fit 13 SL Manual

Table of Contents

Advertisement

Water Temperature

The temperature shows at the bottom of
the screen gives the actual water tempera-
ture. Use the Up and Down icon to set the
desired temperature. The set point will ap-
pear in blue. After 3 seconds without any
change to the set temperature value, the
current water temperature will reappear.
When the set value is lower than the cur-
rent temperature Cooling to xx.x will appear
in the message center below. When the
set value is higher than the current tem-
perature, Heating to xx.x will be indicated
instead. Normally there is a short delay
before the heating starts, during which
Heating Suspended is indicated.

Home Page

From the home page you will find the fol-
lowing options:
in.stream2 (audio system)

settings

To select an option, slide the left wheel
until the desired icon menu is shown in the
middle of the screen.
Settings
From the home page you will find the
following options:
Water Care
Maintenance
Date & Time
Keypad
Electrical Configuration
Wi-Fi
About
To select an option, slide the right wheel
until the desired icon menu is shown in the
middle screen or press on the menu name.
22
In-Fit Exercise Pools

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents