Swim Spa Components - L.A. Spas In-Fit 13 SL Manual

SWIM SPA COMPONENTS

Reference only. Equipment is not always as shown
Note: No consumer serviceable parts.
We recommend that only an authorized
service technician perform swim spa
repair or service.
A. Pumps: Each pump features single or
dual-speed capacity. Low speed is
utilized for water circulation during filtration
and heating, and for lighter therapy and
exercise programs; high speed is engaged
for maximum action of the jets when
deeper therapy or more rigorous exercise
programs are desired. All pump functions
are activated by topside controls.
B. Electronic Control Pack: All swim spa
functions are operated by this control.
There are no user-serviceable components
in this control. Opening this control may
subject you to high voltage and danger of
electrical shock or electrocution.
In-Fit Exercise Pools
Warning and Installation Label: Contains
important safety information, hazard
warnings and installation instructions.
C. Slice Valve: Used to shut off water flow
from the swim spa vessel to pumps
and electronic control pack while servicing.
Quantity will vary depending on model.
All valves should be open during normal
operations.
D. Electrical Connections: Contains
receptacles for electrical connections.
Connections are made during manufacture
of the pool and by your electrician.
E. Heater Assembly: Thermostatically
controlled and equipped with an overheat
safety shut-off.
13