L.A. Spas In-Fit 13 SL Manual page 11

NOTE: Reference separate swim spa
installation manual during installation.
Thermal Creep
Your spa is manufactured with energy-effi-
cient components and systems that capture
heat generated by the equipment, then
transfer that heat back to the spa water. In
warmer weather or in situations with ex-
tended run times, "Thermal Creep" may oc-
cur. Thermal Creep is a condition whereby
the actual water temperature is higher than
the set temperature. To manage "Thermal
Creep" you may:
- Vent your cover. Newer covers have
removable center seal padding. To remove
this padding, open the Velcro on one side
of the vinyl pouch and slide the white
padding out. If your spa does not have
removable center seal padding, you may
instead place a folded cloth about ¾" (2cm)
thick under all four corners of the cover be-
fore you lock it down. Opening the cover at
night will also quickly cool the water down
if desired.
- Open all air controls
- Set your filtration cycles to run during the
cooler times of the day or at night
- Reduce the length of your filter cycles
- Visit your local dealer for additional guid-
ance
Thermal Creep only occurs in well-insulated
hot tubs. It is not an indication that some-
thing is wrong with your spa or its equip-
ment.
In-Fit Exercise Pools
11