Fuel Hoses - Stihl MS 441 Manual

14.8.2 Fuel hoses

1
– Remove carburetor housing,
b 14.6.2.
: Push fuel hose (1) out.
1
: Pull off elbow connector (1).
– Remove pick-up body, b 14.8.1.
1
: Ease out fuel hose (1).
– Pull fuel hose out from inside
tank.
122
: Examine fuel hoses and replace
if necessary.
1
: Push fuel hose (1) into opening
(arrow) in fuel tank.
1
: Fit flange (1) and press it into the
fixture (arrow) on the housing
until it rests against the housing.
1
: Push elbow connector (1) into
fuel hose (arrow).
1
: Pull fuel intake hose (1) out of
fuel tank with assembly hook
5910 893 8800.
Do not over-extend the fuel hose.
– Install pick-up body, b 14.8.1.
MS 441, MS 441 C