Watts AERCO Benchmark BMK750 Operation And Service Manual page 19

Benchmark with Edge [I]: Operation-Maintenance Manual
SECTION 2: OPERATION
Engineering Version
Graphic Data Version
Display Version
I/O Board Version
Touch Version
Bluetooth Version
Framework Version
Bootloader version
Display BL Version
I/O PCB BL Version
Main Menu
2.3.3.6
Main Menu → Diagnostics → Comm & Network → IP Network
Unit IP Address
Subnet Mask
Gateway IP Address
DSN 1
DSN 2
Unit MAC Address
Network Status
Main Menu → Diagnostics → Comm & Network → BAS
BAS
Communication
Address
Device Instance
Unit IP Address
Unit MAC Address
Last Command
Received
BAS IP
Network Status
Main Menu → Diagnostics → Comm & Network → onAER
Unit IP Address
Upload Time
Test Setup
Test Heartbeat
Main Menu → Diagnostics → Comm & Network → USB Storage
Status
Serial Number
Size
Available Space
OMM-0145_A99 • GF-218 •
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
→ →
Diagnostics
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Read Only
Enable
Enable
Read Only
Read Only
Read Only
Read Only
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
9/18/2019
The Controller's Engineering software version.
The Controller's graphic version.
The Controller's display version.
The I/O board version.
The touch screen version.
The Bluetooth version.
The Framework version.
The Bootloader version.
Display Bootloader version.
I/O Board PCB Bootloader version.
Comm & Network
The unit's IP address.
The unit's subnet mask address.
The unit's gateway IP address.
The unit's DSN 1 address.
The unit's DSN 2 address.
The unit's MAC address.
The unit's current network status.
The Building Automation System protocol.
The unit's BAS address.
The unit's Device Instance within BAS.
The unit's IP address on the network.
The unit's MAC address within BAS.
The last command received by the unit.
If Security is enabled, this is the IP of the BAS system
that the unit can only communicate with.
The unit's BAS network's current status.
The unit's IP address.
Frequency at which the unit transmits data to onAER
Initiates test o onAER functionality.
Initiates test of the onAER heartbeat.
Status of the USB device.
The serial number of the USB device.
The size of the USB device.
The amount of free space on the USB device.
Page 19 of 157