Advertisement
SoftStop
STEP 6
Anchor Rail Assembly
PARTS
B
10007536
1 EA
U
10007550
8 EA
BB
10001299
8 EA
Use only Trinity Highway parts
that are speci ed herein for the
SoftStop® System for assembling,
maintaining, or repairing the
SoftStop® System. Do not utilise
or otherwise comingle parts from
other systems even if those systems
are Trinity Highway systems.
Release 06/19
® Tangent End Terminal
1. Assemble all parts in the con guration & orientation shown above.
2. Place SoftStop® Anchor Rail (Part B) on the tra c side and lap in the direction of
tra c as shown above using shown hardware.
3. Tighten all threaded hardware to a snug position with an appropriately sized
wrench or socket.
Do not bolt the SoftStop® Anchor Rail to Post2. Failure to
follow this warning could result in serious injury or death
in the event of a collision.
INSTRUCTIONS
WARNINGS
22
Advertisement
