Advertisement
SoftStop
STEP 4
O set Block Assembly (Post 2)
PARTS
H
10001397
1 EA
T
10001300
1 EA
BB
10001299
1EA
Use only Trinity Highway parts
that are speci ed herein for the
SoftStop® System for assembling,
maintaining, or repairing the
SoftStop® System. Do not utilise
or otherwise comingle parts from
other systems even if those systems
are Trinity Highway systems.
Release 06/19
® Tangent End Terminal
1. Assemble all parts in the con guration & orientation shown above.
2. Attach (1 EA) O set Block (Part H) on tra c side of Post 2. The O set Block is
equipped with a self-hanging mounting tab.
3. Secure O set Block to post with shown hardware.
4. Tighten all threaded hardware to a snug position with an appropriately sized
wrench or socket.
Do not use any O set Block (Part H) if they show signs of
damage. Seek replacement from Ingal Civil Products prior
to assembly.
INSTRUCTIONS
WARNINGS
20
Advertisement
