Download Print this page

Valmont Industries INGAL CIVIL SoftStop Product Manual page 15

Tangent end terminal

Advertisement

SoftStop
® Tangent End Terminal
6.3
SoftStop® System Impact Head
S o f t S top
S ystem I mpact H ead
®
The SoftStop® Impact Head (10007538) component is symmetrical and can be assembled on the left or right shoulder.
The SoftStop
Impact Head ( 15208A) component is symmetrical and can b e assemb led on the left or
®
The diagram below lists some of the subcomponents of the Impact Head.
The diagram below lists some of the subcomponents of the Impact Head.
right shou lder. The diagram b elow lists some of the su b components of the Impact Head.
B ottom G uide Channel
V ertical S trap
When properly assemb led, the SoftStop
Figure 11: SoftStop® System Impact Head
grade line or hav e an u pw ard tilt ( tow ards front of the system) . The elev ation of the Impact Head can
v ary a max imu m of 58 mm higher at Point A relativ e to Point B. Point A is measu red from the finished
When properly assembled, the SoftStop® Impact Head shall only be assembled parallel to the nished grade line or have
When properly assembled, the SoftStop® Impact Head shall only be assembled parallel to the nished grade line or have
grade line to w here the corner of the side plate connects w ith the top gu ide channel and Point B is
an upward tilt (towards front of the system). The elevation of the Impact Head can vary a maximum of 58 mm higher
measu red from the finished grade line to w here the inside corner of the v ertical strap connects w ith the
at Point A relative to Point B. Point A is measured from the nished grade line to where the corner of the side plate
.
top gu idechannel
connects with the top guide channel and Point B is measured from the nished grade line to where the inside corner of
the vertical strap connects with the top guide channel.
www.ingalcivil.co.nz
www.ingalcivil.com.au
Figure 12: Correct assembly of the SoftStop Impact Head
Release 06/19
T op G uide Channel
Connection B rack et
Impact Head shall only b e assemb led parallel to the finished
®
21
S tri k e P late
Chute
Created May 2016
All rights in copyright reserved
15

Advertisement

loading